Commissioning Engineer (Cathodic Protection)
Archirodon Group N.V · Abu Dhabi
وصف الوظيفة
About the role
Archirodon, an international EPC contractor active for more than half a century in energy, marine, infrastructure and defence projects, is looking for a Commissioning Engineer specialising in cathodic protection (CP) systems. The role covers commissioning of impressed current and galvanic anode CP systems, from pre-commissioning checks through energisation, testing and handover.
Key responsibilities
- Prepare and review commissioning procedures, test plans, checklists and inspection and test records for impressed current and galvanic anode CP systems.
- Verify installation and readiness of transformer rectifiers, anode beds, junction boxes, test stations, reference electrodes and associated cables against approved drawings.
- Perform and witness pre-commissioning checks, including cable continuity and insulation resistance, polarity verification, anode bed resistance and baseline structure-to-electrolyte potential measurements.
- Energise and adjust transformer rectifiers, measure current output and protection potentials, and verify performance against acceptance criteria.
- Carry out ON and instant-OFF potential measurements, close-interval potential surveys (CIPS) and interference testing where required.
- Troubleshoot low protection levels, stray current interference, cable faults and rectifier failures, coordinate corrective work and retesting.
- Coordinate commissioning activities and client witness inspections with construction, QA/QC, HSE, vendors and operations teams.
- Close punch items, prepare test reports, baseline readings and handover dossiers, and ensure compliance with site HSE, permit-to-work and electrical isolation requirements.
Required profile
- Bachelor's degree in electrical engineering, materials, corrosion or a related engineering discipline.
- Minimum 10-12 years of experience in electrical commissioning within oil and gas, power generation or petrochemical projects.
- At least 5 years of hands-on cathodic protection commissioning on oil and gas projects, including impressed current and galvanic anode systems.
- Ability to interpret CP layouts, wiring diagrams, design calculations and project specifications.
- Full professional proficiency in English.
- ADNOC-approved or equivalent commissioning or HV/LV safety certification, and training in electrical safety, LOTO and PTW, are an advantage.
Required skills
- Familiarity with AMPP and ISO standards and client specifications; AMPP CP2 certification or higher preferred.
- Proficiency in MS Office, electrical testing tools (OMICRON/Doble software) and CMS commissioning tracking systems.
- Basic knowledge of AutoCAD for red-line updates is beneficial.
Questions fréquentes
لماذا تبلغ عن هذا العرض؟
اكتشف المزيد
الرواتب والأدلة وعمليات البحث في الإمارات العربية المتحدة.
الرواتب حسب المهنة
قدم طلبك في 30 ثانية
أدخل بريدك الإلكتروني للتقديم. سيتم إنشاء حساب تلقائياً.
بالمتابعة، أنت توافق على شروط الاستخدام.
لديك حساب بالفعل؟ تسجيل الدخول
لديك سؤال حول هذا العرض؟
اطرحه هنا: ستصلك تفاصيل العرض كاملة عبر البريد الإلكتروني، فوراً.
عزز فرصك
حمّل سيرتك الذاتية وسنقترح عليك الوظائف التي تناسب ملفك.
جاري تحليل سيرتك الذاتية...
Archirodon Group N.V
Abu Dhabi