QC Multi Coating and Welding Inspector
Oceaneering · Abu Dhabi
وصف الوظيفة
About the role
Oceaneering is hiring a QA/QC Inspector in Abu Dhabi to carry out quality control on offshore projects. The inspector covers welding and painting/coating processes, from raw material checks through to final inspection reports, in line with client and regulatory standards.
Key responsibilities
- Inspect raw welding consumables against the Welding Procedure Specification (WPS)
- Check weld joint bevel angle, root gap, fit-up and alignment, and monitor root and hot pass amperage/voltage
- Coordinate NDT of weld joints and manage client film review and sign-off
- Inspect coating raw materials, including salt levels before sand blasting, and monitor weather, blasting profile, salt and dust tests, surface temperature and humidity
- Apply primer, pre-heat and heat joints to 180-200 C with induction coils, install heat-shrink sleeves, run holiday testing at 25 kV and verify sleeve DFT
- Witness all activities against the Inspection Test Plan (ITP) and prepare final welding and coating inspection reports for client signature
Required profile
- Minimum 5 years of solid experience in QC welding/painting inspection in the oil and gas industry
- Ability to perform the essential duties satisfactorily; reasonable accommodations may be made
Required skills
- Certified Welding Inspector (AWI CWI, SCWI)
- CSWIP 3.1 and 3.2
- Painting BGAS grades 3, 2 and 1
- NACE level 1, 2 and 3
Questions fréquentes
لماذا تبلغ عن هذا العرض؟
اكتشف المزيد
الرواتب والأدلة وعمليات البحث في الإمارات العربية المتحدة.
الرواتب حسب المهنة
قدم طلبك في 30 ثانية
أدخل بريدك الإلكتروني للتقديم. سيتم إنشاء حساب تلقائياً.
بالمتابعة، أنت توافق على شروط الاستخدام.
لديك حساب بالفعل؟ تسجيل الدخول
لديك سؤال حول هذا العرض؟
اطرحه هنا: ستصلك تفاصيل العرض كاملة عبر البريد الإلكتروني، فوراً.
عزز فرصك
حمّل سيرتك الذاتية وسنقترح عليك الوظائف التي تناسب ملفك.
جاري تحليل سيرتك الذاتية...
Oceaneering
Abu Dhabi